By Ian Low, Product Line Manager - Wellbore CleaningAt Odfjell Technology, we understand the critical role of maintaining the highest standards for offshore equipment in ensuring the safety, efficiency and longevity of offshore operations. This is…
Read more
The use of magnets has proven to be a simple, cheap and effective way of removing metal debris from a well. Every WBCU operation should include…
Drill pipe tool joints are tough as steel, but before you send them down hole, be sure they have the proper protection. Hardbanding does the job…
If you think make-up is all about reading graphs on a computer display, this is undoubtedly a blog post you should read carefully. To master the…
With increased well costs, particularly in deepwater wells, the benefits of combining operations in one trip are too good to ignore. With new advances…
Drill pipe buckling is a nasty thing. When a tubular (casing or drill string) buckles, it can become useless - or worse, it may cause other problems,…
Don't make a too shallow decision based solely on the cost of investment. The following key factors should be taken into considertion when deciding…
When drilling the well and running tubulars, the drilling fluid will have a higher density than the reservoir/formation fluids to prevent any…
Smart drilling professionals don't rely on dumb luck when choosing their dumb iron. Selecting the right drill pipe for the job is just as important as…
You've thoroughly identified and marked your hazards. Safe routes are established. Bolts and nuts are constantly being tightened and the safety mats…
Premature completion failure caused by debris interfering with valves, electronics and hardware is an ever-present threat. A robust clean up of the…
To every drilling supervisor, getting stuck pipe is a nightmare. You want to get out, but you can't. But unlike a bad dream, which is free of charge,…
We're in a highly competitive business were figures are astronomical and the fine line between success and failure is made out of a pile of…